Approved_users
510
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
Initial page layout
The CW305 target is an FPGA target board for use with the ChipWhisperer capture hardware. This board lets you test side channel analysis techniques on an Artix-7 FPGA. With this setup, a different toolchain is required: we won't be building C firmware with a makefile. This tutorial walks through the various steps required to run an AES-128 example on the CW305 target.
= Target Firmware =
== Opening the Project ==
== FPGA Code Layout ==
== Building the Project ==
= Hardware Connections =
- USB for configuring target
- 20 pin header
- Measurement (LNA output)
= Capture Setup =
- Example script
- Upload bitstream
- Sample captures
= Target Firmware =
== Opening the Project ==
== FPGA Code Layout ==
== Building the Project ==
= Hardware Connections =
- USB for configuring target
- 20 pin header
- Measurement (LNA output)
= Capture Setup =
- Example script
- Upload bitstream
- Sample captures
