Adewar: Created page with "The "GLITCH" port is used for voltage glitching. It's connected to two MOSFET elements, as the following figure shows:
image <..."

2020-03-12T19:21:43Z

Created page with "The "GLITCH" port is used for voltage glitching. It's connected to two MOSFET elements, as the following figure shows: <blockquote>image <..."

New page

The "GLITCH" port is used for voltage glitching. It's connected to two MOSFET elements, as the following figure shows:

<blockquote>[[File:glitch_lp_hp.png|image]]
</blockquote>
The CW1173 glitch output can be commanded to turn on either of those MOSFETs via the "Glitch Out Enable" checkboxes:

<blockquote>[[File:glitch_gui.png|image]]
</blockquote>
Be careful using this feature, as you don't want to short the MOSFETs for too long. It's also possible to damage the ChipWhisperer-Lite by burning these MOSFETs up if used incorrectly. See tutorial #A3 for more information on using this feature.

V4:CW1173 ChipWhisperer-Lite/Glitch Port - Revision history

Adewar: Created page with "The "GLITCH" port is used for voltage glitching. It's connected to two MOSFET elements, as the following figure shows: image <..."

Adewar: Created page with "The "GLITCH" port is used for voltage glitching. It's connected to two MOSFET elements, as the following figure shows:
image <..."