| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW308T-XMEGA"
From ChipWhisperer Wiki
(→I/O Connections) (Tag: VisualEditor) |
|||
| Line 7: | Line 7: | ||
{| class="wikitable" | {| class="wikitable" | ||
!CW308 Pin | !CW308 Pin | ||
| − | ! | + | !ATXMega Pin |
!Notes | !Notes | ||
|- | |- | ||
|GPIO1 | |GPIO1 | ||
| − | | | + | |PC3 (TXD0) |
| − | |Serial | + | |Serial OUTPUT from AVR. |
|- | |- | ||
|GPIO2 | |GPIO2 | ||
| − | | | + | |PC2 (RXD0) |
| − | |Serial | + | |Serial INPUT to AVR. |
|- | |- | ||
|GPIO3 | |GPIO3 | ||
| − | | | + | |PA1 |
| − | | | + | |Spare pin. |
|- | |- | ||
|GPIO4 | |GPIO4 | ||
| − | | | + | |PA0 |
| − | |Trigger pin | + | |Trigger pin. |
|- | |- | ||
|CLKIN | |CLKIN | ||
| Line 31: | Line 31: | ||
|- | |- | ||
|CLKFB | |CLKFB | ||
| − | | | + | |PB3 |
| − | |Can | + | |Can output clock on this pin. Useful for synchronizing to internal RC oscillator. |
|- | |- | ||
| − | | | + | |LED1 |
| − | | | + | |PA5 |
| − | | | + | | |
|- | |- | ||
| − | | | + | |LED2 |
| − | | | + | |PA6 |
| − | | | + | | |
| + | |- | ||
| + | |LED3 | ||
| + | |PA7 | ||
| + | | | ||
|- | |- | ||
| − | | | + | |PDID |
| − | | | + | |PDID |
| − | | | + | |In-System programming. |
|- | |- | ||
| − | | | + | |PDIC/nRST |
| − | | | + | |nRST/PDIC |
| − | | | + | |In-System programming. |
|} | |} | ||
Revision as of 18:35, 23 September 2016
The CW308T-XMEGA fits an Atmel XMEGA device.
I/O Connections
| CW308 Pin | ATXMega Pin | Notes |
|---|---|---|
| GPIO1 | PC3 (TXD0) | Serial OUTPUT from AVR. |
| GPIO2 | PC2 (RXD0) | Serial INPUT to AVR. |
| GPIO3 | PA1 | Spare pin. |
| GPIO4 | PA0 | Trigger pin. |
| CLKIN | XTAL1 | |
| CLKFB | PB3 | Can output clock on this pin. Useful for synchronizing to internal RC oscillator. |
| LED1 | PA5 | |
| LED2 | PA6 | |
| LED3 | PA7 | |
| PDID | PDID | In-System programming. |
| PDIC/nRST | nRST/PDIC | In-System programming. |
Programming Header
The 6-pin programming heading can be used with the Atmel PDI interface. The pinout of the 6-pin programming header on the main-board allows it to work with standard Atmel ISP tools:
Schematic
