458
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
m
update of picture
<p>[[File:cwlite_simpleserial.png|image]]</p>
<p>This should connect to the ChipWhisperer-Lite, program the FPGA, and run a few captures. Your screen should look something like this now:</p>
<p>[[File:cwdemo_normalStep Connection Quick Start 05 02.pngPNG|1000px|image]]</p></li>
<li><p>If the previous step fails, you may need to set the path for the "firmware". This is done by going to the "Tools" menu and selecting the "Config CW Firmware" option. Note on MAC OS X a special command is required instead sometimes, see [[MacOSX_Installation]].</p>
<p>From there, hit the "FIND" button beside the "FPGA .zip (Release)" option. Point it to the file located at <code>chipwhisperer/hardware/capture/chipwhisperer-lite/cwlite_firmware.zip</code> on your filesystem.</p></li>
