An external programmer is needed for this target. The Quark D2000 dev-board can be used with jumper wires, or a standard OpenOCD programmer can be used.
=== How to flash D2000 board using OpenOCD ===
TODO - TEMP
Start a command prompt
C:\IntelSWTools\ISSM_2016.0.027\issm_env.bat
gdb
target remote :3333
monitor clk32M 500
monitor load_image C:\\chipwhisperer\\hardware\\victims\\firmware\\intel_quark\\quark_d2000_rom.bin 0x0
monitor load_image C:\\chipwhisperer\\hardware\\victims\\firmware\\intel_quark\\simpleserial_example\\release\\quark_d2000\\x86\\bin\\simpleserial_aes.bin 0x00180000
cd %ISSM_DEBUGGER_ROOT%\openocd
bin\openocd.exe -f scripts\board\quark_d2000.cfg
== Schematic ==