| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW303 XMEGA Target/Communication"
From ChipWhisperer Wiki
(Created page with "= Setting up Communication = Sets up the ability for communication with the target using the ChipWhisperer scope. == Using GUI Scripts == Within the python console run the fol...") |
(No difference)
|
Revision as of 05:56, 19 April 2018
Setting up Communication
Sets up the ability for communication with the target using the ChipWhisperer scope.
Using GUI Scripts
Within the python console run the following scripts in order:
connect_cwlite_simpleserial.pysetup_cwlite_xmega.py
Python scripting
Execute these lines of code within the python console:
import chipwhisperer as cw
scope = cw.scope()
target = cw.target(scope)
scope.gain.gain = 45
scope.adc.samples = 25000
scope.adc.offset = 0
scope.adc.basic_mode = "rising_edge"
scope.clock.clkgen_freq = 7370000
scope.clock.adc_src = "clkgen_x4"
scope.trigger.triggers = "tio4"
scope.io.tio1 = "serial_rx"
scope.io.tio2 = "serial_tx"
scope.io.hs2 = "clkgen"
