|
|
| (18 intermediate revisions by 4 users not shown) |
| Line 1: |
Line 1: |
| − | {{Infobox cw308target
| + | == Page Moved == |
| − | |name = CW308T-CEC1702
| + | |
| − | |image = File:CEC1702_Wiki.PNG
| + | |
| − | |caption =
| + | |
| − | |Target Device = MCHP CEC1702
| + | |
| − | |Target Architecture = ARM Cortex M4F
| + | |
| − | |Hardware Crypto = AES, SHA, RSA
| + | |
| − | |Purchase Hardware =
| + | |
| − | |Supported Applications = []
| + | |
| − | |Programmer = Generic SPI Flash Programmer
| + | |
| − | |Status = In Development
| + | |
| − | }}The CEC1702 is an embedded controller with strong cryptographic support, customized for Internet of Things (IOT) platforms. The chip implements a highly-configurable, mixed signal, advanced I/O controller architecture. The device incorporates a 32-bit ARM Cortex M4F Microcontroller core with closely-coupled SRAM for code and data. A secure boot-loader is used to download the custom firmware image from the system’s shared SPI Flash device, thereby allowing system designers to customize the device’s behavior. The CW308T-CEC1702 incorporates the main chip with a 16MB SPI flash chip and a bi-directional SPI Buffer. The target board has standard power monitoring, UART serial, and clock In/Out compatibility with the CW308. JTAG pins and many GPIO pins are also exposed for prototyping and testing use.
| + | |
| | | | |
| − | == I/O Connections ==
| + | See [https://rtfm.newae.com/Targets/UFO%20Targets/CW308T-CEC1702/ NewAE RTFM Page] which is now built from the [https://github.com/newaetech/chipwhisperer-target-cw308t GIT Repo]. |
| | | | |
| − | {| class="wikitable"
| + | The previous content on this wiki has been moved to the above link. See wiki history if you would like to view exact older versions of this page. |
| − | !CW308 Pin
| + | |
| − | !CEC1702 Pin
| + | |
| − | !Function
| + | |
| − | |-
| + | |
| − | |GPIO1
| + | |
| − | |P104 (TXD0)
| + | |
| − | |Serial OUTPUT from CEC1702
| + | |
| − | |-
| + | |
| − | |GPIO2
| + | |
| − | |P105 (RXD0)
| + | |
| − | |Serial INPUT to CEC1702
| + | |
| − | |-
| + | |
| − | |GPIO3
| + | |
| − | |P030
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |GPIO4
| + | |
| − | |P017
| + | |
| − | |Trigger pin
| + | |
| − | |-
| + | |
| − | |CLKIN
| + | |
| − | |XTAL2
| + | |
| − | |Optional CLKIN
| + | |
| − | |-
| + | |
| − | |CLKFB
| + | |
| − | |P002 (PWM5)
| + | |
| − | |Can output 12MHz PWM on this pin. Useful for synchronizing to internal oscillator
| + | |
| − | |-
| + | |
| − | |J_TRST
| + | |
| − | |JTAG_RST
| + | |
| − | |JTAG Reset
| + | |
| − | |-
| + | |
| − | |J_TDI
| + | |
| − | |JTAG_TDI
| + | |
| − | |JTAG TDI
| + | |
| − | |-
| + | |
| − | |J_TDO
| + | |
| − | |JTAG_TDO
| + | |
| − | |JTAG TDO
| + | |
| − | |-
| + | |
| − | |J_TMS
| + | |
| − | |JTAG_TMS
| + | |
| − | |JTAG TMS
| + | |
| − | |-
| + | |
| − | |J_TCK
| + | |
| − | |JTAG_CLK
| + | |
| − | |JTAG Clock
| + | |
| − | |-
| + | |
| − | |LED1
| + | |
| − | |P156
| + | |
| − | |GPIO, Breathing LED0
| + | |
| − | |-
| + | |
| − | |LED2
| + | |
| − | |P157
| + | |
| − | |GPIO, Breathing LED1
| + | |
| − | |-
| + | |
| − | |LED3
| + | |
| − | |PA7
| + | |
| − | |GPIO, LED
| + | |
| − | |-
| + | |
| − | |PDIC
| + | |
| − | |
| + | |
| − | |SPI buffer output enable, drive high to enable SPI programming and sniffing
| + | |
| − | |-
| + | |
| − | |PDID/CS
| + | |
| − | |QSPI0_CS
| + | |
| − | |SPI chip select for SPI flash chip
| + | |
| − | |-
| + | |
| − | |H1
| + | |
| − | |P040
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H2
| + | |
| − | |P031
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H3
| + | |
| − | |P026
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H4
| + | |
| − | |P053
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H5
| + | |
| − | |P054
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H6
| + | |
| − | |P027
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H7
| + | |
| − | |P107
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H8
| + | |
| − | |P120
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H9
| + | |
| − | |P112
| + | |
| − | |GPIO
| + | |
| − | |-
| + | |
| − | |H10
| + | |
| − | |P113
| + | |
| − | |GPIO
| + | |
| − | |}
| + | |
| − | | + | |
| − | == Hardware Cryptography ==
| + | |
| − | | + | |
| − | ==== Multi-purpose AES Cryptographic Engine ====
| + | |
| − | - Hardware support for ECB, CTR, CBC, and OFB AES modes
| + | |
| − | | + | |
| − | - Support for 128-bit, 192-bit and 256-bit key length
| + | |
| − | | + | |
| − | - DMA interface to SRAM, shared with Hash engine
| + | |
| − | | + | |
| − | ==== Cryptographic Hash Engine ====
| + | |
| − | - Support for SHA-1, SHA-256, SHA-512
| + | |
| − | | + | |
| − | - DMA interface to SRAM, shared with AES engine
| + | |
| − | | + | |
| − | ==== Public Key Cryptographic Engine ====
| + | |
| − | - Hardware support for RSA and Elliptic Curve public key algorithms
| + | |
| − | - RSA keys length from 1024 to 4096 bits
| + | |
| − | - ECC Prime Field and Binary Field keys up to 640 bits
| + | |
| − | - Microcoded support for standard public key algorithms
| + | |
| − | | + | |
| − | ==== Cryptographic Features ====
| + | |
| − | - True Random Number Generator
| + | |
| − | - 1 Kbit FIFO
| + | |
| − | - Monotonic Counter
| + | |
| − | | + | |
| − | == Programming/Debug Connections ==
| + | |
| − | Programming the target involves three
| + | |
