Difference between revisions of "CW308T-GENERIC"

Latest revision as of 11:38, 29 July 2020

See NewAE RTFM Page which is now built from the GIT Repo.

The previous content on this wiki has been moved to the above link. See wiki history if you would like to view exact older versions of this page.

@@ Line 1: / Line 1: @@
+== Page Moved ==
-This is a basic prototype board which can be used for mounting other chips on the [[CW308 UFO Target]]. It can also be used to mount small boards (see the examples for photos).
+See [https://rtfm.newae.com/Targets/UFO%20Targets/CW308T-GENERIC/ NewAE RTFM Page] which is now built from the [https://github.com/newaetech/chipwhisperer-target-cw308t GIT Repo].
-== Usage ==
+The previous content on this wiki has been moved to the above link. See wiki history if you would like to view exact older versions of this page.
-== Examples ==
-The following shows several examples of this board in use.
-=== Hue Bridge 2.0 ===
-This shows an extreme example of mounting a board onto the victim board. The actual analysis was being done on the SAMR21R on the main board, but this provided mechanical stability to allow tacking wires onto that area.
-[[File:huebridge2.JPG|400px]]
-=== Hue ATMega2564RF2R Based Bulb ===
-The SPI traffic was wired out as well in this example, and a ChipWhisperer-Pro was used to trigger on SPI traffic.
-[[File:huebulb_m2564rfr2.jpg|400px]]
-=== Riscure CTF Board ===
-This example allowed both power analysis and clock glitching to be performed against the board. A small shunt resistor is soldered in-line for the VCC pin.
-[[File:riscure_ctf.jpg|400px]]
-[[Category: CW308 Targets]]