Difference between revisions of "OpenADC Low Frequency Input"

(Created page with " This is based on the following technical report: [http://permalink.lanl.gov/object/tr?what=info:lanl-repo/lareport/LA-UR-15-26344] You can greatly increase the low-frequency...")
 
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
  
This is based on the following technical report: [http://permalink.lanl.gov/object/tr?what=info:lanl-repo/lareport/LA-UR-15-26344]
+
This is based on the following technical report: [http://permalink.lanl.gov/object/tr?what=info:lanl-repo/lareport/LA-UR-15-26344 A Four Channel Beam Current Monitor Data Acquisition System Using Embedded Processors]
  
 
You can greatly increase the low-frequency response by adjusting two items:
 
You can greatly increase the low-frequency response by adjusting two items:
Line 7: Line 7:
 
* Remove solder jumper SJ1
 
* Remove solder jumper SJ1
  
See the linked report for details.
+
See the linked report above for details.
  
 
[[Category: Tips]]
 
[[Category: Tips]]

Latest revision as of 08:14, 10 April 2017

This is based on the following technical report: A Four Channel Beam Current Monitor Data Acquisition System Using Embedded Processors

You can greatly increase the low-frequency response by adjusting two items:

  • Change capacitor C33
  • Remove solder jumper SJ1

See the linked report above for details.