| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW308 UFO Target"
From ChipWhisperer Wiki
| Line 1: | Line 1: | ||
The CW308 UFO Board is a handy main-board for attacking all sorts of embedded targets. Released in 2016, it forms the basis for most of our upcoming target boards. It can be used stand-alone (with an oscilloscope) or with the ChipWhisperer-Capture hardware. | The CW308 UFO Board is a handy main-board for attacking all sorts of embedded targets. Released in 2016, it forms the basis for most of our upcoming target boards. It can be used stand-alone (with an oscilloscope) or with the ChipWhisperer-Capture hardware. | ||
| + | |||
| + | == Overview == | ||
| + | |||
| + | == Target Board Connectors == | ||
== I/O Connections == | == I/O Connections == | ||
| + | |||
| + | There are two main I/O connection points: the pin headers which duplicate the target board connections, and the 20-pin ChipWhisperer header. | ||
| + | |||
| + | The ChipWhisperer header pins (most of the pins on header J5) have diode protection to set a maximum voltage level. The maximum voltage is set by the voltage present on the middle pin of J4. | ||
== Clock Network == | == Clock Network == | ||
| Line 16: | Line 24: | ||
== Programmer Connections == | == Programmer Connections == | ||
| + | |||
| + | == Jumper Summary == | ||
== Schematic == | == Schematic == | ||
Revision as of 13:47, 23 September 2016
The CW308 UFO Board is a handy main-board for attacking all sorts of embedded targets. Released in 2016, it forms the basis for most of our upcoming target boards. It can be used stand-alone (with an oscilloscope) or with the ChipWhisperer-Capture hardware.
Contents
Overview
Target Board Connectors
I/O Connections
There are two main I/O connection points: the pin headers which duplicate the target board connections, and the 20-pin ChipWhisperer header.
The ChipWhisperer header pins (most of the pins on header J5) have diode protection to set a maximum voltage level. The maximum voltage is set by the voltage present on the middle pin of J4.
