| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW308T-AVR"
From ChipWhisperer Wiki
(→I/O Connections: Add AVR I/O connections.) (Tag: VisualEditor) |
|||
| Line 5: | Line 5: | ||
The pinout of this module matches the "NOTDuino" kit along with the "CW301 Multi-Target Board" routing. The following is the connection between GPIO1-4 and the I/O lines on the AVR: | The pinout of this module matches the "NOTDuino" kit along with the "CW301 Multi-Target Board" routing. The following is the connection between GPIO1-4 and the I/O lines on the AVR: | ||
| − | + | {| class="wikitable" | |
| − | + | !CW308 Pin | |
| + | !ATMega328P Pin | ||
| + | !Notes | ||
| + | |- | ||
| + | |GPIO1 | ||
| + | |PD0 (RXD) | ||
| + | |Serial INPUT to AVR. | ||
| + | |- | ||
| + | |GPIO2 | ||
| + | |PD1 (TXD) | ||
| + | |Serial OUTPUT from AVR. | ||
| + | |- | ||
| + | |GPIO3 | ||
| + | |N/C | ||
| + | | | ||
| + | |- | ||
| + | |GPIO4 | ||
| + | |PC0 | ||
| + | |Trigger pin (mapped to ADC-port such that I/O driver power comes from AVCC). | ||
| + | |- | ||
| + | |CLKIN | ||
| + | |XTAL1 | ||
| + | | | ||
| + | |- | ||
| + | |CLKFB | ||
| + | |PB0 | ||
| + | |Can set this pin as CLKO with fuse. Useful for synchronizing to internal RC oscillator. | ||
| + | |- | ||
| + | |nRST | ||
| + | |nRST (PC6) | ||
| + | |Used by in-system-programming (ISP) interface. | ||
| + | |- | ||
| + | |MOSI | ||
| + | |PB3 (MOSI) | ||
| + | |Used by in-system-programming (ISP) interface. | ||
| + | |- | ||
| + | |MISO | ||
| + | |PB4 (MISO) | ||
| + | |Used by in-system-programming (ISP) interface. | ||
| + | |- | ||
| + | |SCK | ||
| + | |PB5 (SCK) | ||
| + | |Used by in-system-programming (ISP) interface. | ||
| + | |} | ||
== Programming Header == | == Programming Header == | ||
Revision as of 18:30, 23 September 2016
I/O Connections
The pinout of this module matches the "NOTDuino" kit along with the "CW301 Multi-Target Board" routing. The following is the connection between GPIO1-4 and the I/O lines on the AVR:
| CW308 Pin | ATMega328P Pin | Notes |
|---|---|---|
| GPIO1 | PD0 (RXD) | Serial INPUT to AVR. |
| GPIO2 | PD1 (TXD) | Serial OUTPUT from AVR. |
| GPIO3 | N/C | |
| GPIO4 | PC0 | Trigger pin (mapped to ADC-port such that I/O driver power comes from AVCC). |
| CLKIN | XTAL1 | |
| CLKFB | PB0 | Can set this pin as CLKO with fuse. Useful for synchronizing to internal RC oscillator. |
| nRST | nRST (PC6) | Used by in-system-programming (ISP) interface. |
| MOSI | PB3 (MOSI) | Used by in-system-programming (ISP) interface. |
| MISO | PB4 (MISO) | Used by in-system-programming (ISP) interface. |
| SCK | PB5 (SCK) | Used by in-system-programming (ISP) interface. |
Programming Header
The 6-pin programming heading can be used with the Atmel ISP interface. The pinout of the 6-pin programming header on the main-board allows it to work with standard Atmel ISP tools:
Schematic
