| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW308T-AVR"
From ChipWhisperer Wiki
| Line 7: | Line 7: | ||
|Hardware Crypto = No | |Hardware Crypto = No | ||
|Purchase Hardware = | |Purchase Hardware = | ||
| − | |Design Files = | + | |Design Files = [https://github.com/newaetech/chipwhisperer/tree/master/hardware/victims/cw308_ufo_target/avr GITHub link] |
| + | [https://github.com/newaetech/chipwhisperer/blob/master/hardware/victims/cw308_ufo_target/avr/cw308t-avr-bom-1click.tsv 1-Click BOM] | ||
| + | [https://oshpark.com/shared_projects/65GO0ZHN OSH Park PCBs] | ||
|Supported Applications = | |Supported Applications = | ||
}} | }} | ||
Revision as of 07:54, 2 April 2017
| CW308T-AVR | |
|---|---|
 | |
| Target Device | Atmel AVR |
| Target Architecture | 8-bit Harvard |
| Hardware Crypto | No |
| Design Files | OSH Park PCBs |
I/O Connections
The pinout of this module matches the "NOTDuino" kit along with the "CW301 Multi-Target Board" routing. The following is the connection between GPIO1-4 and the I/O lines on the AVR:
| CW308 Pin | ATMega328P Pin | Notes |
|---|---|---|
| GPIO1 | PD0 (RXD) | Serial INPUT to AVR. |
| GPIO2 | PD1 (TXD) | Serial OUTPUT from AVR. |
| GPIO3 | N/C | |
| GPIO4 | PC0 | Trigger pin (mapped to ADC-port such that I/O driver power comes from AVCC). |
| CLKIN | XTAL1 | |
| CLKFB | PB0 | Can set this pin as CLKO with fuse. Useful for synchronizing to internal RC oscillator. |
| nRST | nRST (PC6) | Used by in-system-programming (ISP) interface. |
| MOSI | PB3 (MOSI) | Used by in-system-programming (ISP) interface. |
| MISO | PB4 (MISO) | Used by in-system-programming (ISP) interface. |
| SCK | PB5 (SCK) | Used by in-system-programming (ISP) interface. |
Programming Header
The 6-pin programming heading can be used with the Atmel ISP interface. The pinout of the 6-pin programming header on the main-board allows it to work with standard Atmel ISP tools:
Schematic
