| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Difference between revisions of "CW308T-MEGARF"
From ChipWhisperer Wiki
| Line 5: | Line 5: | ||
The following is the original (-01) schematic, which was never publically released. The following changes were made in -02: | The following is the original (-01) schematic, which was never publically released. The following changes were made in -02: | ||
| − | * MOSI/MISO was switched on Atmel device (requires PCB fix) | + | * MOSI/MISO was switched on Atmel device (requires PCB fix on -01, or PCB will not work) |
| − | * TST connected to ground (requires PCB fix) | + | * TST connected to ground (requires PCB fix on -01, or PCB will not work) |
* CLKI pull down | * CLKI pull down | ||
* GPIO3 is now optionally in control of 4066 instead of being hardwired | * GPIO3 is now optionally in control of 4066 instead of being hardwired | ||
Revision as of 07:49, 10 October 2016
The following is the original (-01) schematic, which was never publically released. The following changes were made in -02:
- MOSI/MISO was switched on Atmel device (requires PCB fix on -01, or PCB will not work)
- TST connected to ground (requires PCB fix on -01, or PCB will not work)
- CLKI pull down
- GPIO3 is now optionally in control of 4066 instead of being hardwired
- Serial resistors added on SCK/MISO/MOSI lines
