CW308 UFO Target

The CW308 UFO Board is a handy main-board for attacking all sorts of embedded targets. Released in 2016, it forms the basis for most of our upcoming target boards. It can be used stand-alone (with an oscilloscope) or with the ChipWhisperer-Capture hardware.

Overview

Target Board Connectors

I/O Connections

There are two main I/O connection points: the pin headers which duplicate the target board connections, and the 20-pin ChipWhisperer header.

The ChipWhisperer header pins (most of the pins on header J5) have diode protection to set a maximum voltage level. The maximum voltage is set by the voltage present on the middle pin of J4.

Clock Network

Clock Selection

Crystal Driver

Power Distribution

External Power Sources

On-Board LDOs

Programmer Connections

Jumper Summary

Schematic