As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com.

CW308T-MEGARF

From ChipWhisperer Wiki
Revision as of 18:21, 3 November 2016 by Coflynn (Talk | contribs) (Historical Note)

Jump to: navigation, search

Meagrf render 02.png

Programming

The ChipWhisperer's AVR programmer supports this target directly. No external programmer is required.

Schematic

See GIT Repo for PDF of schematic.

CW308T ATMegaRF 02.png

Board Layout

See GIT Repo for gerber files.

Historical Note

The following is the original (-01) schematic. The -01 PCBs were never publicly released and used during development only. The following changes were made in -02:

  • MOSI/MISO was switched on Atmel device (requires PCB fix on -01, or PCB will not work)
  • TST connected to ground (requires PCB fix on -01, or PCB will not work)
  • CLKI pull down
  • GPIO3 is now optionally in control of 4066 instead of being hardwired
  • Serial resistors added on SCK/MISO/MOSI lines

CW308T ATMegaRF 01.png