As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com.

CW303 XMEGA Target/Solder Jumpers

From ChipWhisperer Wiki

< CW303 XMEGA Target

Revision as of 12:45, 12 April 2018 by Fheubach (Talk | contribs) (Created page with "== Solder Jumpers == ; SJ2 : Selects the source of the input to the VCC filter - either the 20-pin 3.3V VCC (default), or the optional voltage regulator which derives the pow...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Solder Jumpers

SJ2: Selects the source of the input to the VCC filter - either the 20-pin 3.3V VCC (default), or the optional voltage regulator which derives the power from a USB-Micro connector.
SJ3: Connects the output of the VCC filter to the XMEGA VCC network. Soldered by default.
SJ4: Connects the SMA Measure header to the resistive shunt. Soldered by default.
SJ5: Connects the SMA Glitch header to the resistive shunt. Soldered by default.
SJ7: Connects the VCC of the XMEGA board to VREF on 20-pin header. Soldered by default.

Retrieved from "http://wiki.newae.com/index.php?title=CW303_XMEGA_Target/Solder_Jumpers&oldid=3239"