CW308T-MEGARF

Revision as of 07:49, 10 October 2016 by Coflynn (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Revision as of 07:49, 10 October 2016 by Coflynn (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The following is the original (-01) schematic, which was never publically released. The following changes were made in -02:

MOSI/MISO was switched on Atmel device (requires PCB fix)
TST connected to ground (requires PCB fix)
CLKI pull down
GPIO3 is now optionally in control of 4066 instead of being hardwired
Serial resistors added on SCK/MISO/MOSI lines

Last modified on 29 July 2020, at 11:31