Open main menu

CW308T-MEGARF

Revision as of 07:49, 10 October 2016 by Coflynn (Talk | contribs)

Revision as of 07:49, 10 October 2016 by Coflynn (Talk | contribs)

Megarf render.png

The following is the original (-01) schematic, which was never publically released. The following changes were made in -02:

  • MOSI/MISO was switched on Atmel device (requires PCB fix on -01, or PCB will not work)
  • TST connected to ground (requires PCB fix on -01, or PCB will not work)
  • CLKI pull down
  • GPIO3 is now optionally in control of 4066 instead of being hardwired
  • Serial resistors added on SCK/MISO/MOSI lines

CW308T ATMegaRF 01.png

Last modified on 29 July 2020, at 11:31