Tutorial CW305-1 Building a Project
The CW305 target is an FPGA target board for use with the ChipWhisperer capture hardware. This board lets you test side channel analysis techniques on an Artix-7 FPGA. With this setup, a different toolchain is required: we won't be building C firmware with a makefile. This tutorial walks through the various steps required to run an AES-128 example on the CW305 target.
Target Firmware
Opening the Project
FPGA Code Layout
Building the Project
Hardware Connections
- USB for configuring target - 20 pin header - Measurement (LNA output)
Capture Setup
- Example script - Upload bitstream - Sample captures