Demo Application

The demo application provides examples of:

• Using serial interface (implements Simple-Serial).
• Using CAN interface.
• Enabling all three cores, and communicating between cores with shared memory.
• Running software AES on main core.
• Running password-check (XOR) on main core.
• Setup of clock network for using external clock from ChipWhisperer.
• Enabling the PASS module & passing a password to it (to allow DPA testing of PASS module).

This demo application is posted as a separate github repository at https://github.com/newaetech/chipwhisperer-target-mpc5748g. The github link includes additional documentation.

Offered Variants

The product is available in one variant:

• The "NORMAL" variant which is normally shipped (i.e., P/N NAE-CW308T-MPC5748G). This variant has the following setup:
  • HSM is not programmed. We cannot provide details on this usage without a NDA.
  • The four OTP password groups have been programmed with 4 known passwords you can use for experimentation.
  • Device lifecycle is progressed to the "OEM Production" stage. This will prevent you from doing certain updates to the memory, but for most "normal" uses will not prevent reloading of code etc. This progression is done since it is required to use the password/censorship features.
  • The demo application is loaded which includes ability to execute code loaded over the serial port and change/read memory locations (but is NOT a full bootloader).
  • Device censorship is disabled (this can be turned on using an external programmer).
  • The JTAG port has a known password, but is not locked (this can be turned on using an external programmer or via load functions).

Programming

The device is designed to use an external programmer for reflashing, as it does not include a bootloader. The suggested programmer (scripts are provided in the GIT repo) is the PE-Micro which requires purchasing:

• PEMicro USB Multilink or USB Mulilink FX
• PEMicro PROGPPCNEXUS (Programmer SW only) or PEMicro PowerPC Nexus Development Kit (includes Debugger). You may be able to use a GDB server instead but we haven't tested this.

You can use the MPC5748G-DEVKIT instead with invasive hardware mods - the devkit has an on-board programmer, but it uses buffers such it cannot be routed to any available header pins. You would need to solder small jumper wires to small SMD pins for this to work. However as the dev-kit is very cheap, it may be worthwhile to scrap one and convert into an external programmer.

HSM Usage

The device features a HSM, but details of this are under NDA and cannot be made public.

Random Useful Tips

 E:\nxp\S32DS_Power_v2017.R1\Cross_Tools\powerpc-eabivle-4_9\bin>powerpc-eabivle-objdump.exe -mpowerpc -Me200z4 -D -b srec -EB MPC5748G.s19 > MPC5748G.txt