Tutorial Map

You just unboxed your ChipWhisperer, what now?? You should try some of the tutorials of course.

The quick path:

• Install ChipWhisperer, see page Installing ChipWhisperer.
• Follow Tutorial B5 Breaking AES (Straightforward) for a quick demo.

That didn't teach you too much. So the suggested tutorial path for a full background would be:

• Tutorial B1 Building a SimpleSerial Project
• Tutorial B2 Viewing Instruction Power Differences
• Tutorial B3-1 Timing Analysis with Power for Password Bypass (skip on Arm)
• Tutorial B11 Breaking RSA (skip on Arm)

From there we will skip to Differential Power Analysis tutorials:

• Tutorial B5 Breaking AES (Straightforward)
• Tutorial B6 Breaking AES (Manual CPA Attack)

You might want to do some glitching now? Note: glitch attacks are being updated for the Arm target and will be available in the future for this target.

• Tutorial A2 Introduction to Glitch Attacks (including Glitch Explorer)
• Tutorial A3 VCC Glitch Attacks
• Tutorial A7 Glitch Buffer Attacks
• Tutorial A9 Bypassing LPC1114 Read Protect (LPC-P1114 board required)

If you have CW-Pro you can do:

• Tutorial P1 Stream Mode and Advanced Triggering

If you have an ARM target board you can do:

• Tutorial A8 32bit AES