Open main menu

Tutorial B2 Viewing Instruction Power Differences

Revision as of 04:09, 29 July 2019 by Coflynn (Talk | contribs)

Revision as of 04:09, 29 July 2019 by Coflynn (Talk | contribs)

This tutorial has been updated for ChipWhisperer 5 release. If you are using 4.x.x or 3.x.x see the "V4" or "V3" link in the sidebar.

B2: Viewing Instruction Power Differences
Target Architecture XMEGA/Arm/Other
Hardware Crypto No
Software Release V3 / V4 / V5

This tutorial will introduce you to measuring the power consumption of a device under attack. It will demonstrate how you can view the difference between assembly instructions. In ChipWhisperer 5 Release, the software documentation is now held outside the wiki. See links below.


XMEGA Target

See the following for using:

  • ChipWhisperer-Lite Classic (XMEGA)
  • ChipWhisperer-Lite Capture + XMEGA Target on UFO Board (including NAE-SCAPACK-L1/L2 users)
  • ChipWhisperer-Pro + XMEGA Target on UFO Board

https://chipwhisperer.readthedocs.io/en/latest/tutorials/pa_intro_2-openadc-cwlitexmega.html#tutorial-pa-intro-2-openadc-cwlitexmega

ChipWhisperer-Lite ARM / STM32F3 Target

See the following for using:

  • ChipWhisperer-Lite 32-bit (STM32F3 Target)
  • ChipWhisperer-Lite Capture + STM32F3 Target on UFO Board (including NAE-SCAPACK-L1/L2 users)
  • ChipWhisperer-Pro + STM32F3 Target on UFO Board

https://chipwhisperer.readthedocs.io/en/latest/tutorials/pa_intro_2-openadc-cwlitearm.html#tutorial-pa-intro-2-openadc-cwlitearm

ChipWhisperer Nano Target

Last modified on 29 July 2019, at 04:19