Open main menu

CW1173 ChipWhisperer-Lite/XMEGA Programmer

< CW1173 ChipWhisperer-Lite
Revision as of 11:12, 12 March 2020 by Adewar (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Revision as of 11:12, 12 March 2020 by Adewar (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This section has been recently updated for ChipWhisperer 5. The previous version can be found here: https://wiki.newae.com/V4:CW1173_ChipWhisperer-Lite/XMEGA_Programmer

The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is a specific pin on the XMEGA device. See #20-Pin_Connector for details of XMEGA programming pin connections. Once you have the scope setup, the programmer can be accessed through cw.programmers.XMEGAProgrammer: 

prog = cw.programmers.XMEGAProgrammer
cw.program_target(scope, prog, "<path to fw hex file>")
Last modified on 12 March 2020, at 11:12