Approved_users, bureaucrat, administrator
1,956
edits
Changes
no edit summary
The CW308 UFO Board is a handy main-board for attacking all sorts of embedded targets. Released in 2016, it forms the basis for most of our upcoming target boards. It can be used stand-alone (with an oscilloscope) or with the ChipWhisperer-Capture hardware.
== Overview ==
== Target Board Connectors ==
== I/O Connections ==
There are two main I/O connection points: the pin headers which duplicate the target board connections, and the 20-pin ChipWhisperer header.
The ChipWhisperer header pins (most of the pins on header J5) have diode protection to set a maximum voltage level. The maximum voltage is set by the voltage present on the middle pin of J4.
== Clock Network ==
== Programmer Connections ==
== Jumper Summary ==
== Schematic ==