Changes

CW308 UFO Target

480 bytes added, 11:31, 24 September 2016
Jumper Summary
== Jumper Summary ==
=== J3: Clock selection.===
J4: VREF selectionSelects clock routing on the board.
=== J4: VREF selection. === Selects levels for the diode clamps, selects voltage set on ChipWhisperer 20-pin connector VREF pin, selects I/O level for crystal oscillator. === J14: Filter input selection. === Selects source of FILT_IN pin. This pin can either come from the victim board (where victim sets own voltage), or the VADJ network (where adjustable regulator is used). The adjustable regulator is often required when overcoming the voltage drop in the shunt and/or filter.
== Usage Example: Stand-Alone ==
Approved_users, bureaucrat, administrator
1,956
edits