Approved_users, bureaucrat, administrator
1,956
edits
Changes
no edit summary
This shows an extreme example of mounting a board onto the victim board. The actual analysis was being done on the SAMR21R on the main board, but this provided mechanical stability to allow tacking wires onto that area.
=== Hue ATMega2564RF2R Based Bulb ===
The SPI traffic was wired out as well in this example, and a ChipWhisperer-Pro was used to trigger on SPI traffic.
[[File:huebulb_m2564rfr2.jpg|400px]]
=== Riscure CTF Board ===
This example allowed both power analysis and clock glitching to be performed against the board. A small shunt resistor is soldered in-line for the VCC pin.
[[File:riscure_ctf.jpg|400px]]
[[Category: CW308 Targets]]