Approved_users
510
edits
Changes
no edit summary
## Enable the module and configure the input points. To start, set the reference points to (9063, 9177) and the input window to (9010, 9080), but don't be afraid to change these ranges:
##: [[File:resyncsad2.png|image]]
##: {{warningbox| You may have to adjust the reference points & input window ranges - the objective is to get a nice aligned trace on the second part.}}
## Redraw the traces and confirm we now have synchronization on the second half:
##: [[File:resyncsad3.png|image]]