10
edits
Changes
→Rev -02 Boards
# Select the "Serial STM32F Programmer"
#: [[File:arm_programmer.png]]
# Mount a jumper between the H1/H2 and PDIC pins on the UFO board (again this is ONLY for the -02 rev, the -03 and newer revision DO NOT need this jumper as the ChipWhisperer will toggle the pin).#: [[File:samjumperSTMF32F-02 programmer jumper.pngjpg|400px]]
# Reset the ARM device either by pressing the reset button (newer UFO boards only), or by toggling power:
#: [[File:arm_togglepower.png]]