</dd></dl>
</li>
<li><p>To check for a successful installation Run ChipWhisperer-Capture. If you're running v5This can be done from one of three ways:</p>
<blockquote><ul>
<li>Run Double-click on <code>CWCapture.pyw</code> in the <code>chipwhisperer\software</code> folder. You must have installed Python (either via into your path for this to work.</li><li>run <code>python CWCapture.pyw</code> from the <code>chipwhisperer\software</code> folder using a command line or via Jupyter Notebooks), then prompt with Python in the path.</li><li>run <code>import chipwhisperer as cw; scope = cwpython CWCaptureGUI.scope()py</code> from the <code>chipwhisperer\software\chipwhisperer\capture\ui</code> directory.</li></ul>
<p>The last option is the most reliable, in that it should always work on all platforms. If it doesn't start look for possible missing modules or other useful errors.</lip><blockquote><p>'''hint'''</ulp><p>The first time you run ChipWhisperer-Capture or -Analyzer, the default setup of the screen is somewhat insane. You can drag windows around or close them to make it look more like the demos here. See the Video quickstart guide as well for details of that.</p></blockquote></blockquote></li><li><p>From the "Scripts" directory, run the <code>ChipWhisperer-Lite: AES SimpleSerial on XMEGA</code> script:</p>You <p>[[File:cwlite_simpleserial.png|image]]</p><p>This should connect to the ChipWhisperer-Lite, program the FPGA, and run a few captures. Your screen should look something like this now be all ready :</p><p>[[File:Step Connection Quick Start 05 02.PNG|1000px|image]]</p></li><li><p>If the previous step fails, you may need to start following set the tutorialspath for the "firmware".This is done by going to the "Tools" menu and selecting the "Config CW Firmware" option. Note on MAC OS X a special command is required instead sometimes, see [[MacOSX_Installation]].</p><p>From there, hit the "FIND" button beside the "FPGA .zip (Release)" option. Point it to the file located at <code>chipwhisperer/hardware/capture/chipwhisperer-lite/cwlite_firmware.zip</code> on your filesystem.</p></li><li>Your ChipWhisperer-Lite is now connected. See the next section for details of the demo attack.</li></ol>
== Capture and Attack Quickstart ==