218
edits
Changes
→The Basic
If you want more advanced setups, you will have to configure the capture environment manually using the Setting tabs, starting with the "Generic Settings":
# Select the desired "Scope Module" (i.e.: ChipWhisperer/OpenADC). Leave it as None if you just only want to use the target.# Select the desired "Target Module" (i.e.: Simple Serial). Leave it as None if you just only want to use the scope.# Select the desired "Trace Format" (i.e.: ChipWhisperer/Native). Leave it as None if you don't need to save the traces, as often happen when executing the Glitching attack.
# Switch to the "Scope Settings" tab and setup your scope connection (i.e. selecting 'NewAE USB (CWLite/CW1200)').
# Switch to the "Target Settings" tab and setup your target connection (i.e. selecting 'NewAE USB (CWLite/CW1200)').