Approved_users, bureaucrat, administrator
1,956
edits
Changes
→Victim Board Connectors: Full pinout for target connections
|nRST
|CW308 --> Victim
|100k pull-up to VREF.
|-
|12
{| class="wikitable"
!J7 (WestSouth, AB)
!Function
!Direction
!Notes
|-
|1
|GND
|
|
|-
|2
|JTAG_TRST
|
|Connects to 20-pin ARM JTAG header.
|-
|3
|JTAG_TDI
|
|Connects to 20-pin ARM JTAG header.
|-
|4
|JTAG_TDO
|
|Connects to 20-pin ARM JTAG header.
|-
|5
|JTAG_TMS
|
|Connects to 20-pin ARM JTAG header.
|-
|6
|JTAG_TCK
|
|Connects to 20-pin ARM JTAG header.
|-
|7
|JTAG_VREF
|
|Connects to 20-pin ARM JTAG header. All JTAG_ pins have 100k pull-up to this pin. Must set to appropriate value.
|-
|8
|JTAG_nRST
|
|Connects to 20-pin ARM JTAG header.
|-
|9
|GND
|
|
|-
|10
|GND
|
|
|-
|11
|HDR1
|
|J10, J12, J15: Pin 1
|-
|12
|HDR2
|
|J10, J12, J15: Pin 2
|-
|13
|HDR3
|
|J10, J12, J15: Pin 3
|-
|14
|HDR4
|
|J10, J12, J15: Pin 4
|-
|15
|HDR5
|
|J10, J12, J15: Pin 5
|-
|16
|HDR6
|
|J10, J12, J15: Pin 6
|-
|17
|HDR7
|
|J10, J12: Pin 7
|-
|18
|HDR8
|
|J10, J12: Pin 8
|-
|19
|HDR9
|
|J10: Pin 9
|-
|20
|HDR10
|
|J11: Pin 10
|}
{| class="wikitable"
!J7 (WestEast, AC)
!Function
!Direction
!Notes
|-
|1
|GND
|
|
|-
|2
|SHUNTL
|
|Low-Side Shunt Connection (connects to SMA)
|-
|3
|SHUNTH
|
|High-Side Shunt Connection (power input side)
|-
|4
|GND
|
|
|-
|5
|FILT_HP|CW308 --> Victim|High-Power filter output (same as FILT_LP on this hardware)
|-
|6
|FILT_LP|CW308 --> Victim|Low-Power filter output (same as FILT_HP on this hardware)
|-
|7
|GND
|
|
|-
|8
|FILTIN|CW308 <-- Victim|Input to power supply filter.
|-
|9
|GND
|
|
|-
|10
|GND
|
|
|-
|11
|1.2V|CW308 --> Victim|1.2V LDO Regulator output
|-
|12
|1.8V|CW308 --> Victim|1.8V LDO Regulator output
|-
|13
|2.5V|CW308 --> Victim|2.5V LDO Regulator output
|-
|14
|3.3V|CW308 --> Victim|3.3V LDO Regulator output OR 3.3V from 20-pin connector
|-
|15
|5.0V|CW308 --> Victim|5.0V from either DC-Power jack or 20-pin connector
|-
|16
|GND
|
|
|-
|17
|GND
|
|
|-
|18
|LED1|CW308 <-- Victim|Active-high buffered LED driver. 100k pull-down.
|-
|19
|LED2|CW308 <-- Victim|Active-high buffered LED driver. 100k pull-down.
|-
|20
|LED3|CW308 <-- Victim|Active-high buffered LED driver. 100k pull-down.
|}