Approved_users, bureaucrat, administrator
1,956
edits
Changes
Created page with " The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is..."
The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is a specific pin on the XMEGA device. See [[#20-Pin_Connector]] for details of XMEGA programming pin connections.
[[File:xmegaprog_main.png|image]]