== Screen 3: Trigger ==
The trigger screen shows the current settings for the trigger moduleand the ADC capture settings.
'''TODO: picture'''
* '''Trigger Pins''': Whether each trigger input is enabled. Active inputs are highlighted
** '''Mode''': Trigger combination method. Could be AND, OR, or NAND
* '''Trigger Source''': The trigger type in use. Active trigger module is highlighted
** '''State''': The current output level of the trigger module
* '''Trigger Mode''': The ADC trigger type. Active mode is highlighted
* '''Samples''':
** '''Delay''': Current ADC offset. This is the number of samples to wait after trigger before recording begins
** '''Pre''': Number of pre-trigger samples to be saved
** '''Time''': Delay, but converted into a time
** '''Total''': Number of samples to be recorded in total
* '''ADC gain''':
** '''Mode''': Amplification type. Either low or high
** '''Setting''': Low noise amplifier gain level
== Screen 4: Glitch ==
'''TODO: picture'''
* '''Clock Src''': Input to the glitch module's clock. Active clock is highlighted
** '''DCM''': Lock status of the glitch module's DCM
* '''Glitch Setup''':
** '''Width''': Duty cycle of glitch pulse, as a fraction of one period
** '''Fine''': Adjustment on width
** '''Offset''': Distance between clock rising edge and glitch pulse rising edge, as a fraction of one period
** '''Fine''': Adjustment on offset
* '''View''': Schematic of glitch clock. Shows regular clock above (blue) and glitch module output below (black)
* '''Trigger Src''': Input for glitch module. Active source is highlighted
* '''Trigger Setup''':
** '''Trigger''': Cause a manual trigger. Has no effect unless trigger source is set to Manual
** '''Offset''': Number of cycles to wait before starting glitch pulses
** '''Repeat''': Number of consecutive pulses to generate
* '''Output Status'''
** '''VCC''': Status of glitching MOSFETs. Shows warning sign if VCC glitching is enabled
** '''Cnt''': Total number of glitch pulses generated
- Pictures of screens
- Descriptions of displays
{{Template:Hardware}}