Approved_users
510
edits
Changes
→Building the Basic Example
<li>We want to use the existing SimpleSerial firmware as a base for our project, but we don't want to edit the existing firmware. Instead, we'll make a new project with a copy of this firmware. Copy the directory <code>simpleserial-base</code> which is found at <code>chipwhisperer\hardware\victims\firmware\</code> of the chipwhisperer release to a new directory called <code>simpleserial-base-lab1</code>. You must keep it in the same directory, as it will reference other files within that directory for the build process.</li>
<li><dl>
<dt>Open a terminal with avr-gcc in the path. If using Windows the sidebar on the [[Installing_ChipWhisperer]] page - you can either</dt><dd><p>add WinAVR to your system path, or you can run the 'winavr.bat' file suggested.</p></dddt></dl>
</li>
<li><p>Change the terminal to the newly copied directory. For example:</p>