Approved_users
510
edits
Changes
no edit summary
<p>If this is successful, you'll see an output like the following:</p>
<p>[[File:Avr-build-ok.png|image]]</p>
<p>If instead you get an error something like <code>make: *** No rule to make target `simpleserial.elf', needed by `elf'. Stop.</code>, this means a required file was missing.</p></li>
Programming the target AVR is accomplished in one of two methods depending on your hardware. The ChipWhisperer Capture Rev 2 uses the external "AVR Studio" program, whereas the CW1173 and CW1200 use a programmer menu from the ChipWhisperer-Capture software.