Open main menu

Changes

Setting up Software for B1

10 bytes added, 17:43, 19 May 2017
no edit summary
Assuming this setup is complete, you can confirm you are able to communicate with the hardware by running the example capture of traces given in the [[CW1173_ChipWhisperer-Lite]] quick-start.
== <h2> Programming the Example ==</h2>
Note with the CW1173 you need to configure a clock before programming of the device will succeed. Programming of the target device will be done as part of the CW-Capture software setup, discussed next.
== <h2> Communicating from CW-Capture Software ==</h2>
Next, open the CW-Capture software. Then perform the following steps: