458
edits
Changes
no edit summary
<p>
This tutorial can only be completed using the [[CW1200_ChipWhisperer-Pro]]. The ChipWhisperer software and its prerequisites should be installedand the [[CW1200_ChipWhisperer-Pro]] and hardware should be connected to each other and your computer. If not, this is the page for you: [[Installing ChipWhisperer]]. This tutorial is an extension of [[Tutorial B1 Building a SimpleSerial Project]] and [[Tutorial B5 Breaking AES (Straightforward)]], which should be completed first for better understanding.
</p>
********************************/
</syntaxhighlight>
</li>
<li>
Save this code, and then find the <code>makefile</code> file and open it in a text editor of your choice. Find this piece of code near the top:
<pre>
# Target file name (without extension).
# This is the base name of the compiled .hex file.
TARGET = simpleserial-aes
# List C source files here.
# Header files (.h) are automatically pulled in.
SRC += simpleserial-aes.c
</pre>
Change the <code>TARGET = simpleserial-aes</code> line to <code>TARGET = simpleserial-aes-stream</code> and the <code>SRC += simpleserial-aes.c</code> line to <code>SRC += simpleserial-aes-stream.c</code>
</li>
<li>
Open your command line in the <code>simpleserial-aes-stream</code> directory and run the <code>make</code> command for the correct target. For example: for the XMEGA run <code>make PLATFORM=CW303</code>. This will create a <code>.hex</code> file in the same directory. This step requires avr-gcc to be set-up and added to your system path. If you have not done this go back to [[Installing ChipWhisperer]] under the <b>Required Tools</b> dropdown.
</li>
<li>
Next open the ChipWhisperer software. Hopefully you know how to do this by now.
</li>
<li>
Run the <code>Project>Example Scripts>ChipWhisperer-Lite: AES SimpleSerial on XMEGA</code> script. We will modify some of the settings.
</li>
<li>
Under the <b>Scope Settings</b> find the <b>ADC Clock</b> section. Here change the <b>Source</b> setting to <b>CLKGEN x1 via DCM</b>
</li>
</ol>