Approved_users, bureaucrat, administrator
1,956
edits
Changes
→Finding SPA Leakage
</li>
<br>
<li>
Rather than do this manually - you can also run the following commands either in the script, or in the command line:
<syntaxhighlight lang="python">
target.key_cmd = ""
target.output_cmd = ""
scope.clock.adc_src = "clkgen_x1"
scope.adc.samples = 24000
</syntaxhighlight>
</li>
<li>
If you are using Capture V3.5.2 or later you will have support for the length of the trigger output being high reported back to you. If you run capture-1 for example you'll see the trigger was high for 177381 cycles:<br>