Approved_users, bureaucrat, administrator
1,956
edits
Changes
→ATE and EFUSE
* Some additional features of the EFUSE include setting keys for flash decryption and authentication by the bootloader.
You can see an example program that works with the CW308T-CEC1702 device at [https://github.com/newaetech/chipwhisperer-target-cec1702](https://github.com/newaetech/chipwhisperer-target-cec1702). To use E-FUSE with the CW308T, you will need to use a jumper wire. To do this: * Using a screwdriver, adjust VADJ trimmer to output 1.60V. Note you might need to switch the V-ADJ source voltage.* Jumper the VADJ output to the VFUSE header pin.
== Useful Links ==