The following shows several of the connectors available on the CW301.; 20-Pin Connector{{: J2 is a 20-pin connector, which uses the standard NewAE 20-pin connector pinout. See the ChipWhisperer-Lite documentation for details.; SMA Glitch: The SMA glitch connector allows VCC glitches be inserted into the VCC pin. This is done by shorting the resistive shunt R66. By default it connects to the SMA measure connector, but can be disconnected with the solder jumpers.; SMA Measure: The SMA measure connector allows power measurements to be taken across resistive shunt R66. By default it connects to the SMA glitch connector, but can be disconnected with the solder jumpers.; JP13: JP13 provides a pinout with several extra pins from the CW303 XMEGA device.Target/Connectors}}