Approved_users
84
edits
Changes
Created page with "{{Infobox cw308target |name = CW308T-ADUCM3029 |image = SAM4L-Top-small.jpg |caption = |Target Device = Atmel SAM4L..."
{{Infobox cw308target
|name = CW308T-ADUCM3029
|image = SAM4L-Top-small.jpg
|caption =
|Target Device = Atmel SAM4L
|Target Architecture =
|Hardware Crypto = Yes
|Purchase Hardware =
|Design Files = [https://github.com/newaetech/chipwhisperer/tree/develop/hardware/victims/cw308_ufo_target/sam4l GITHub Link]
[https://oshpark.com/projects/Dkr9ybuJ OSH Park PCBs]
|Supported Applications =
|Status = In Developement
}}
This board supports the Silicon Labs EFM32 Giant Gecko 11 microcontroller. The chip mounted on the target board is the EFM32GG11B1.
== Power Supply ==
The core of the Giant Gecko chip runs from a 1.2v supply. This is supplied and filtered through the CW308T. The I/O buses are supplied with 3.3v.
== Security Features ==
For a full list of security features see the product family data sheet<ref>https://www.silabs.com/documents/public/data-sheets/efm32gg-datasheet.pdf</ref>
== Programming ==
A serial bootloader is implemented on the Giant Gecko series of chips. Details for the use of this feature are described in Silicon Labs application note AN0042.
== Schematic and Layout ==
See GIT Repo for design files.
== Hardware ==
{{Template:Hardware}}
[[Category:CW308 Targets]]
|name = CW308T-ADUCM3029
|image = SAM4L-Top-small.jpg
|caption =
|Target Device = Atmel SAM4L
|Target Architecture =
|Hardware Crypto = Yes
|Purchase Hardware =
|Design Files = [https://github.com/newaetech/chipwhisperer/tree/develop/hardware/victims/cw308_ufo_target/sam4l GITHub Link]
[https://oshpark.com/projects/Dkr9ybuJ OSH Park PCBs]
|Supported Applications =
|Status = In Developement
}}
This board supports the Silicon Labs EFM32 Giant Gecko 11 microcontroller. The chip mounted on the target board is the EFM32GG11B1.
== Power Supply ==
The core of the Giant Gecko chip runs from a 1.2v supply. This is supplied and filtered through the CW308T. The I/O buses are supplied with 3.3v.
== Security Features ==
For a full list of security features see the product family data sheet<ref>https://www.silabs.com/documents/public/data-sheets/efm32gg-datasheet.pdf</ref>
== Programming ==
A serial bootloader is implemented on the Giant Gecko series of chips. Details for the use of this feature are described in Silicon Labs application note AN0042.
== Schematic and Layout ==
See GIT Repo for design files.
== Hardware ==
{{Template:Hardware}}
[[Category:CW308 Targets]]