Open main menu

Changes

CW1173 ChipWhisperer-Lite/XMEGA Programmer

31 bytes added, 19:12, 12 March 2020
no edit summary
{{Warningbox|This section has been recently updated for ChipWhisperer 5. The previous version can be found here: https://wiki.newae.com/V4:CW1173_ChipWhisperer-Lite/XMEGA_Programmer}}
The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is a specific pin on the XMEGA device. See [[#20-Pin_Connector]] for details of XMEGA programming pin connections. The Once you have the scope setup, the programmer can be accessed through <code>cw.programmers.XMEGAProgrammer</code>:
<syntaxhighlight lang=python>
Adewar
Approved_users, administrator
366
edits