Changes

{{Warningbox|The serial pins for this target are swapped compared to the usual setup. An example setup script can be found here: https://github.com/newaetech/chipwhisperer-jupyter/blob/1ccd1b1fbd8a3295e1033efb37e53e1022d47cc5/Helper_Scripts/Setup_Notduino.ipynb}}{{Infobox cw308target|name = CW308T-AVR|image = File:P1090088.jpg|caption Page Moved = |Target Device = Atmel AVR|Target Architecture = 8-bit Harvard|Hardware Crypto = No|Purchase Hardware = |Design Files = [https://github.com/newaetech/chipwhisperer/tree/master/hardware/victims/cw308_ufo_target/avr GITHub link]

See [https://githubrtfm.newae.com/newaetechTargets/chipwhispererUFO%20Targets/blobCW308T-AVR/masterNewAE RTFM Page] which is now built from the [https:/hardware/victimsgithub.com/cw308_ufo_target/avrnewaetech/cw308tchipwhisperer-avrtarget-bom-1click.tsv 1-Click BOMcw308t GIT Repo].

[https://oshpark.com/shared_projects/65GO0ZHN OSH Park PCBs]|Supported Applications = [[SimpleSerial | Simple Serial Enc/Auth]]|Programmer = CW Integrated (ISP)Atmel ICE (ISP)|Status = Released}} == I/O Connections == The pinout of this module matches the "NOTDuino" kit along with the "CW301 Multi-Target Board" routing. The following is the connection between GPIO1-4 and the I/O lines previous content on the AVR: {| class="wikitable"!CW308 Pin!ATMega328P Pin!Notes|-|GPIO1|PD0 (RXD)|Serial INPUT to AVR.|-|GPIO2|PD1 (TXD)|Serial OUTPUT from AVR.|-|GPIO3|N/C||-|GPIO4|PC0|Trigger pin (mapped to ADC-port such that I/O driver power comes from AVCC).|-|CLKIN|XTAL1||-|CLKFB|PB0|Can set this pin as CLKO with fuse. Useful for synchronizing wiki has been moved to internal RC oscillator.|-|nRST|nRST (PC6)|Used by in-system-programming (ISP) interface.|-|MOSI|PB3 (MOSI)|Used by in-system-programming (ISP) interface.|-|MISO|PB4 (MISO)|Used by in-system-programming (ISP) interface.|-|SCK|PB5 (SCK)|Used by in-system-programming (ISP) interface.|} == Programming Header == The 6-pin programming heading can be used with the Atmel ISP interfaceabove link. The pinout See wiki history if you would like to view exact older versions of the 6-pin programming header on the main-board allows it to work with standard Atmel ISP tools: [[File:avr_isp.jpg|400px]] == Schematic == [[File:CW308T_AVR_Schematic_Page_1.png|1000px]] [[File:CW308T_AVR_Schematic_Page_2this page.png|1000px]] == Hardware == {{Template:Hardware}}[[Category: CW308 Targets]]