| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Downsampling
From ChipWhisperer Wiki
Revision as of 08:36, 7 April 2017 by Gdeon (Talk | contribs) (Created page with "The ChipWhisperer's downsampling factor allows the ADC to discard a number of samples. For example, with a downsampling factor of 4, only every 4th sample is kept - the other...")
The ChipWhisperer's downsampling factor allows the ADC to discard a number of samples. For example, with a downsampling factor of 4, only every 4th sample is kept - the other 3 are thrown out before the trace is sent back to the computer. This feature has several uses:
- On the ChipWhisperer Lite, space is very limited - the maximum sample count of 24400 can make it difficult to find interesting features in traces or capture longer operations like ECC. Using downsampling can make it easier to find interesting features in these traces.
- On the ChipWhisperer Pro, the sampling rate in streaming mode is limited by the USB connection's data rate: the maximum sampling rate is approximately 10 MS/s. Using downsampling can make it easier to fit under this limit.
For all of these use cases, make sure you're already running the ADC clock slowly if possible. Don't use a 4x faster ADC just to throw out 3/4 of the samples!
Caution: be careful using the ChipWhisperer Pro's SAD trigger! The discarded ADC samples are still used as input for the SAD trigger module. If your reference trace was captured using downsampling, then the ChipWhisperer will never find this downsampled pattern in the raw samples.
