V4:CW1173 ChipWhisperer-Lite/XMEGA Programmer

< V4:CW1173 ChipWhisperer-Lite

Revision as of 11:06, 12 March 2020 by Adewar (Talk | contribs) (Created page with " The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Revision as of 11:06, 12 March 2020 by Adewar (Talk | contribs) (Created page with " The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The XMEGA device programmer requires only two connections to the target: clock (PDIC) and data (PDID). The PDIC line is usually shared with the RESET pin, and the PDID pin is a specific pin on the XMEGA device. See #20-Pin_Connector for details of XMEGA programming pin connections.

Last modified on 12 March 2020, at 11:06