Approved_users, bureaucrat, administrator
1,956
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
no edit summary
|Active-high buffered LED driver. 100k pull-down.
|}
=== Removing / Replacing Victim Boards ===
The target board is removed and replaced using the removal tool. This helps avoid bending pins:
[[File:P1090067.jpg|600px]]
The following shows the removal process:
[[File:removal.gif]]
Adding a board involves carefully aligning the board and pushing down:
[[File:addition.gif]]
The alignment should be carefully checked if resistance is found. You may need to adjust how the board is aligned, as you should be able to press down with minimal force.
The CW308 should be turned off when swapping victim boards.
== I/O Connections ==
=== Crystal Driver ===
[[File:P1090074.jpg]]
== Power Distribution ==
