Approved_users
510
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
→Example Projects
[[File:Stm32-make.png]]
=== Building Running ST Example via GUI with ST-Link ===Once you've built a binary to load onto the target, you're ready to program it. Plug your programmer into the 20 pin JTAG connector (J6 on the UFO board):[[File:]]
Then, the details of this step will depend on your programmer. If you're using an ST-Link programmer, open the ST-Link utility and connect to the device:[[File:Stm32-connect.png]] Load your `.hex` file and program the device with the Program and Verify button:[[File:Stm32-program.png]] After this, you're ready to go - you can use the ChipWhisperer terminal to talk to your target. You might need to reset the target before you do anything else. === Running Building and Debugging via ST Example 's System Workbench ===
== Schematic ==
