458
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
Created page with "= Setting up Communication = Sets up the ability for communication with the target using the ChipWhisperer scope. == Using GUI Scripts == Within the python console run the fol..."
= Setting up Communication =
Sets up the ability for communication with the target using the ChipWhisperer scope.
== Using GUI Scripts ==
Within the python console run the following scripts in order:
<ol>
<li><code> connect_cwlite_simpleserial.py </code></li>
<li><code> setup_cwlite_xmega.py </code></li>
</ol>
== Python scripting ==
Execute these lines of code within the python console:
<syntaxhighlight lang=python>
import chipwhisperer as cw
scope = cw.scope()
target = cw.target(scope)
scope.gain.gain = 45
scope.adc.samples = 25000
scope.adc.offset = 0
scope.adc.basic_mode = "rising_edge"
scope.clock.clkgen_freq = 7370000
scope.clock.adc_src = "clkgen_x4"
scope.trigger.triggers = "tio4"
scope.io.tio1 = "serial_rx"
scope.io.tio2 = "serial_tx"
scope.io.hs2 = "clkgen"
</syntaxhighlight>
Sets up the ability for communication with the target using the ChipWhisperer scope.
== Using GUI Scripts ==
Within the python console run the following scripts in order:
<ol>
<li><code> connect_cwlite_simpleserial.py </code></li>
<li><code> setup_cwlite_xmega.py </code></li>
</ol>
== Python scripting ==
Execute these lines of code within the python console:
<syntaxhighlight lang=python>
import chipwhisperer as cw
scope = cw.scope()
target = cw.target(scope)
scope.gain.gain = 45
scope.adc.samples = 25000
scope.adc.offset = 0
scope.adc.basic_mode = "rising_edge"
scope.clock.clkgen_freq = 7370000
scope.clock.adc_src = "clkgen_x4"
scope.trigger.triggers = "tio4"
scope.io.tio1 = "serial_rx"
scope.io.tio2 = "serial_tx"
scope.io.hs2 = "clkgen"
</syntaxhighlight>
