Approved_users
84
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
Created page with "{{Infobox cw308target |name = CW308T-ADUCM3029 |image = SAM4L-Top-small.jpg |caption = |Target Device = Atmel SAM4L..."
{{Infobox cw308target
|name = CW308T-ADUCM3029
|image = SAM4L-Top-small.jpg
|caption =
|Target Device = Atmel SAM4L
|Target Architecture =
|Hardware Crypto = Yes
|Purchase Hardware =
|Design Files = [https://github.com/newaetech/chipwhisperer/tree/develop/hardware/victims/cw308_ufo_target/sam4l GITHub Link]
[https://oshpark.com/projects/Dkr9ybuJ OSH Park PCBs]
|Supported Applications =
|Status = In Developement
}}
This board supports the Microchip ATSAML11 microcontroller.
== Power Supply ==
The core of the SAML11 chip runs from a 1.2v supply. This is supplied through the CW308T 1.2v regulator. The I/O busses are supplied with 3.3v.
== Security Features ==
The SAML11 platform integrates many advanced security features including:
* Up to four tamper pins for static and dynamic intrusion detections
* Silent flash access for side channel attack resistance
* Data scrambling with user-defined keys for both Flash and RAM
* A True Random Number Generator
For a full list of security features see the product family data sheet<ref>http://ww1.microchip.com/downloads/en/DeviceDoc/SAM-L10L11%20Family-DataSheet%20-%20DS60001513B.pdf</ref>
== Programming ==
The SAML10/11 family implements a serial bootloader. Usage of this bootloader is not detailed in the data sheet, for usage information see Microchip Application note AN2699<ref>http://ww1.microchip.com/downloads/en/AppNotes/00002699A-UART%20Bootloader%20for%20SAM%20L10%20%20SAM%20L11.pdf</ref>.
Serial Wire Debug (SWD) is also supported for programming and debugging applications.
== Schematic and Layout ==
See GIT Repo for design files.
== Hardware ==
{{Template:Hardware}}
[[Category:CW308 Targets]]
|name = CW308T-ADUCM3029
|image = SAM4L-Top-small.jpg
|caption =
|Target Device = Atmel SAM4L
|Target Architecture =
|Hardware Crypto = Yes
|Purchase Hardware =
|Design Files = [https://github.com/newaetech/chipwhisperer/tree/develop/hardware/victims/cw308_ufo_target/sam4l GITHub Link]
[https://oshpark.com/projects/Dkr9ybuJ OSH Park PCBs]
|Supported Applications =
|Status = In Developement
}}
This board supports the Microchip ATSAML11 microcontroller.
== Power Supply ==
The core of the SAML11 chip runs from a 1.2v supply. This is supplied through the CW308T 1.2v regulator. The I/O busses are supplied with 3.3v.
== Security Features ==
The SAML11 platform integrates many advanced security features including:
* Up to four tamper pins for static and dynamic intrusion detections
* Silent flash access for side channel attack resistance
* Data scrambling with user-defined keys for both Flash and RAM
* A True Random Number Generator
For a full list of security features see the product family data sheet<ref>http://ww1.microchip.com/downloads/en/DeviceDoc/SAM-L10L11%20Family-DataSheet%20-%20DS60001513B.pdf</ref>
== Programming ==
The SAML10/11 family implements a serial bootloader. Usage of this bootloader is not detailed in the data sheet, for usage information see Microchip Application note AN2699<ref>http://ww1.microchip.com/downloads/en/AppNotes/00002699A-UART%20Bootloader%20for%20SAM%20L10%20%20SAM%20L11.pdf</ref>.
Serial Wire Debug (SWD) is also supported for programming and debugging applications.
== Schematic and Layout ==
See GIT Repo for design files.
== Hardware ==
{{Template:Hardware}}
[[Category:CW308 Targets]]
