Approved_users, bureaucrat, administrator
1,956
edits
| As of August 2020 the site you are on (wiki.newae.com) is deprecated, and content is now at rtfm.newae.com. |
Changes
→FPGA Configuration
== FPGA Configuration ==
There are three modes you can use to configure the FPGA:
1. Over USB using ChipWhisperer software. Requires reconfiguration on every power cycle.
2. Over JTAG from Xilinx software. Requires reconfiguration on every power cycle.
3. From on-board SPI-Flash on power-up.
These modes are selected by different FPGA mode switch settings. The mode switches are on the back-side of the PCB as shown here:
The setting of the mode switches must be set as in the following table:
=Software Details=
